Stanton PRO-30 Manual Do Utilizador
1. Input selector switches: Selects phono or line inputs of channels 1 and 2
2. Gain control: Controls the input sensitivity of channels 1 and 2
3. Equalizer: Individual controls for low frequency, midrange, and high frequency
2. Gain control: Controls the input sensitivity of channels 1 and 2
3. Equalizer: Individual controls for low frequency, midrange, and high frequency
equalization with (+9/-26 dB)
Any changes made to EQ settings will change the
overall output level.
4. Channel faders: Control the output level of channels 1 and 2
5. Crossfader: Fades the master output between channels 1 and 2
6. Level meter: Based upon the meter mode selector (7) setting, the level meter displays
5. Crossfader: Fades the master output between channels 1 and 2
6. Level meter: Based upon the meter mode selector (7) setting, the level meter displays
the master output stereo signal level, or the cue levels of channels 1 and 2
D E S C R I P T IO N O F FU N C TI O N S
7. Meter mode selector: Determines the setting of the level meter (6). When pressed,
cue levels of channels 1 and 2 are displayed. When released, stereo master output
signal is displayed.
signal is displayed.
8. Power switch: Selects power "ON" or "OFF"
9. Fader Start controls: Activate the Fader Start function when connected to a CD player
9. Fader Start controls: Activate the Fader Start function when connected to a CD player
with fader start capabilities (such as the Next! NCD-7000). When fader start is
engaged, the CD player can be started and paused by the crossfader. This function is
engaged, the CD player can be started and paused by the crossfader. This function is
defeated while crossfader is reversed.
10. Master level control: Controls the overall signal output level of the Master output
11. Booth level control: Controls the overall signal output level of the Booth output
12. Cue level control: Controls the overall headphone output level.
13. Cue select: 3 position selector switch dtermines what is heard in the headphones,
11. Booth level control: Controls the overall signal output level of the Booth output
12. Cue level control: Controls the overall headphone output level.
13. Cue select: 3 position selector switch dtermines what is heard in the headphones,
channel 1, 2, or master output
14. Headphone output: Connection for 1/4 inch headphone.
Recommended
headphone impedance is 32-200 ohms for maximum volume
15. Mic EQ: Individual controls for low and high frequencies equalization with (+/-12 dB)
Any changes made to EQ settings will change the overall microphone output
level.
16. Mic volume control: Controls the overall mirophone output level
17. Crossfader Reverse: Reverses the direction of the crossfader. The fader start function
17. Crossfader Reverse: Reverses the direction of the crossfader. The fader start function
is defeated while crossfader is reversed.
18. Microphone input: 1/4” connector
19. Ground connector: Connects to the turntable ground connector to eliminate electrical
19. Ground connector: Connects to the turntable ground connector to eliminate electrical
hum. Ground connectors are usually supplied with turntables
20. Phono/CD inputs: Switchable line / phono signal inputs for channels 1 and 2
21. Line inputs: Line signal inputs for channels 1 and 2
22. Phono/CD selector switches: Switches CD/Phono inputs for channels 1 and 2 between
21. Line inputs: Line signal inputs for channels 1 and 2
22. Phono/CD selector switches: Switches CD/Phono inputs for channels 1 and 2 between
line and phono
23. Fader Start output: Connects to the fader start inputs of CD players with fader start
function such as the Next! NCD-7000
24. Booth output: Auxiliary output, usually for DJ booth monitoring. Level is controlled by
booth level control (11)
25. Master output: Level is controlled by master level control (10)
26. REC output: Record out connects to tape recorder, mini disk recorder, etc. to
26. REC output: Record out connects to tape recorder, mini disk recorder, etc. to
record performance
27. Voltage selector: Selects between 115V (US) / 230V (EU)
28. Power cord connector: Input connection for the supplied removable power cord.
28. Power cord connector: Input connection for the supplied removable power cord.