Pioneer multi entertainment player double lecteur multi format multi-entertainment player Manuale Utente
CONNECTIONS
16
En
3. Connection to external monitor (pin-jack connector)
Use these connections when you wish to output the center display images to a large screen, or when using CD-G Karaoke. After
connecting this unit to the external monitor, the unit’s settings must be changed (see the item “MONITOR OUT” in the topic “[1]
DISPLAY” under the section “USING THE UTILITY” on P. 60.
connecting this unit to the external monitor, the unit’s settings must be changed (see the item “MONITOR OUT” in the topic “[1]
DISPLAY” under the section “USING THE UTILITY” on P. 60.
4. Connecting other components
A. Connecting another mixer
Connect this unit’s AUDIO OUT connectors to the mixer’s LINE IN or AUX connectors. (Do not connect to PHONO connectors, since
sound will be distorted and proper playback will not be produced.)
sound will be distorted and proper playback will not be produced.)
B. Connecting a stereo amplifier (when not using DJ mixer)
C. Connecting a component with digital input connectors
MEMO
• The digital output connectors produce only audio data without the inclusion of subcodes.
• Depending on the CD recorder or other component, certain features, including CD recording, may be restricted. For details,
• Depending on the CD recorder or other component, certain features, including CD recording, may be restricted. For details,
consult the operating instructions for the connected component.
PC
MONITOR OUT
5V
REMOTE
CONTROL
Control unit
External monitor
Drive unit
Accessory audio cable
Connect to CD or AUX IN connectors
(do not connect to PHONO connectors).
(do not connect to PHONO connectors).
Digital
signal cable
signal cable
Drive unit
CD recorder, amplifier with
digital inputs, etc.
digital inputs, etc.
MEP-7000_WY_EN.book 16 ページ ２００９年２月１２日 木曜日 午後８時２１分