Pioneer multi entertainment player double lecteur multi format multi-entertainment player Manuale Utente
USING DJ SOFTWARE
56
En
At the same time, the display A/B displays “PC”.
6
Use the controller to operate the DJ software.
Use the various buttons, jog dial, and TEMPO adjust slider to
operate the DJ software.
Use the various buttons, jog dial, and TEMPO adjust slider to
operate the DJ software.
7
To switch to playback of disc or tracks on USB storage device
While controller A (or B) is controlling the computer, if a track
on disc or USB storage device is selected on the BROWSE
screen and the LOAD A (or LOAD B) button is pressed,
playback and control will switch to the selected track on disc
or USB storage device.
While controller A (or B) is controlling the computer, if a track
on disc or USB storage device is selected on the BROWSE
screen and the LOAD A (or LOAD B) button is pressed,
playback and control will switch to the selected track on disc
or USB storage device.
Control using “Manipulator Style”
1
Connect to the computer.
The center display will show the [PRO DJ] logo.
The center display will show the [PRO DJ] logo.
2
Start the DJ software program.
When communication is established with the DJ program, the
MEP-7000 operates as a MIDI controller, and the status of
controller A/B and center display section’s buttons and
controls are output as MIDI messages.
When communication is established with the DJ program, the
MEP-7000 operates as a MIDI controller, and the status of
controller A/B and center display section’s buttons and
controls are output as MIDI messages.
Setting a MIDI channel
MIDI channel setting can be performed from the UTILITY screen.
1
1
Press the UTILITY button.
2
Press the [PC] function button.
The center display will show the MIDI channel setting menu.
• Controller A uses the same channel as the center display,
The center display will show the MIDI channel setting menu.
• Controller A uses the same channel as the center display,
while controller B uses a different channel. (Factory defaults
are for Controller A and center display to be set to Channel
1, and Controller B set to Channel 2).
are for Controller A and center display to be set to Channel
1, and Controller B set to Channel 2).
3
Either press the rotary selector dial, or press the select down
(
(
) button.
The
icon will move to the right.
4
Turn the rotary selector dial to change the value.
Values between 1 and 16 can be set.
Values between 1 and 16 can be set.
5
Press the rotary selector dial to confirm the value selected.
• Press the select up (
• Press the select up (
) button to cancel the selection and
return to the UTILITY screen.
MEMO
• By designating the MEP-7000 as an audio output device in the
DJ software, tracks played with the DJ program can be output
from the drive unit.
from the drive unit.
MEMO
• While the UTILITY screen is being displayed on the center
display, the center display’s MIDI messages are not output.
MEP-7000_WY_EN.book 56 ページ ２００９年２月１２日 木曜日 午後８時２１分