Roland VH-11 Manuale Utente

 

The VH-11 is constructed with one floating cymbal, making it 
compatible with commercially available hi-hat stands and 
providing the same feel as you get from an acoustic hi-hat, 
including the stick rebound, the looseness of the cymbal when 
you strike it, and the vertical action of the cymbal when you 
press and release the pedal.

 

When you strike the pad while gradually opening the pedal, 
the tone smoothly opens in response to how much the pedal is 
opened.

 

You can play foot splashes by pressing the pedal and then 
instantly opening it.

 

With the VH-11 connected to a TD-20/12 sound module, you 
can get realistic tonal changes by hitting the closed hi-hat and 
immediately opening it.

 

Sensors in both the top and edge portion make it possible to 
get different sounds by striking the bow (upper surface) and 
the edge (p. 9).

 

You can achieve just the pedal feel you like by adjusting the 
pressure put on the pedal and the tension of the hi-hat stand 
spring.

 

Rubber is used on the striking surface for a damping effect.

 

 Tone changes more naturally from 

open to closed.

 

Although you can control the 
opening and closing, the expression 
of the half-open hi-hat differs from 
that achieved with the completely 
compatible TD-20/12.

 

fig.Contents.e

 

TD-20

Completely Compatible

TD-12

Completely Compatible

TD-10 + TDW-1

Compatible

TD-8

Compatible

TD-6V, TD-6

Compatible

Hi-Hat

Motion Sensor Unit

Insulating Plate

Cable Tie

Tuning Key

VH-11_e 4 ページ ２００５年４月１２日　火曜日　午後１時２０分