Acu-Rite 2007 Manuale Utente

AcuRite sensors are sensitive to surrounding environmental conditions. Proper 

placement of both the display unit and outdoor sensor are critical to the 

accuracy and performance of this product.

Place display unit in a dry area free of dirt and dust. Display 

stands upright for tabletop use or is wall-mountable. For wall 

mounting, hang using the keyhole located on back of the unit. 

 

Sensor must be placed outside to observe outdoor conditions. Sensor 

is water resistant and is designed for general outdoor use, however, 

to extend its life place the sensor in an area protected from direct 

weather elements.
Hang the sensor using the integrated hang holes or hanger, or by 

using string (not included) to hang it from a suitable location, like a 

well covered tree branch. The best location is 4 to 8 feet above the 

ground with permanent shade and plenty of fresh air to circulate 

around the sensor.  

• To ensure accurate temperature measurement, place units out of direct 

sunlight and away from any heat sources or vents. 

• Display unit and outdoor sensor must be within 330 ft (100 m) of each other. 
• To maximize wireless range, place units away from large metallic items, thick 

walls, metal surfaces, or other objects that may limit wireless communication.

• To prevent wireless interference, place both units at least 3 ft (.9 m) away 

from electronic devices (TV, computer, microwave, radio, etc.).

3

(100 meters)

(330 feet maximum)

(.91 m)

The sensor will now synchronize with the display unit. It may take a few 

minutes for synchronization to complete. NOTE: It will take up to 4 hours to 

generate a weather forecast after initial setup.