Acu-Rite 2007 Manuale Utente

no bars

If the wireless signal indicator shows no bars:
•  Relocate the display unit and/or the outdoor sensor. 

The units must be within 330 ft (100 m) of each other.

•  Make sure both units are placed at least 3 feet (.9 m) 

away from electronics that may interfere with the 

wireless communication (such as TVs, microwaves, 

computers, etc).  

•  Use standard alkaline batteries (or lithium batteries in 

sensor when temperature is below -4ºF/-20ºC). Do not 

use heavy duty or rechargeable batteries. NOTE: It 

may take up to 20 minutes for display unit and sensor 

to synchronize after batteries are replaced. 

•  Check that the batteries are installed correctly. 

Batteries may need to be replaced.

•  Reset display by pressing the RESET button, located in 

the battery compartment on the display unit. Time and 

date will need to be entered after a reset.

• Forecast will be blank for first 4 hours after battery  

    installation.

Flashing of the outdoor temperature is generally an 

indication of wireless interference. 

1. Bring both the sensor and display unit indoors and
    remove batteries/power adapter from both.
2. Make sure the A-B-C switch on both units match.
3. Reinstall batteries in the outdoor sensor.
4. Re-connect AC adapter and/or reinstall batteries in       
    the display unit.
5. Let the units sit within a couple feet of each other
    for about 20 minutes to gain a strong connection. 

•  Make sure both the display unit and sensor are 

placed out of direct sunlight and away from any heat 

sources or vents (see page 10).

• Make sure both units are positioned away from any  

    sources of moisture.

It may take up to 14 days for the pressure to calibrate to 

your location.