Black & Decker CS1014 Manuale Utente

Pagina di 32
2
WARNING: Read all safety warnings 
and all instructions. Failure to follow the 
warnings and instructions may result in 
electric shock, fire and/or serious injury. 
SAve All WARNINGS ANd 
INStRuctIoNS foR futuRe RefeReNce
The term “power tool” in the warnings refers 
to your mains-operated (corded) power tool 
or battery-operated (cordless) power tool.
SAve theSe INStRuctIoNS
1)
 WoRk AReA SAfety
• keep work area clean and well lit
Cluttered or dark areas invite accidents.
• do not operate power tools in 
explosive atmospheres, such as in the 
presence of flammable liquids, gases or 
dust. Power tools create sparks which 
may ignite the dust or fumes.
• keep children and bystanders away 
while operating a power tool. Distractions 
can cause you to lose control.
2) electRIcAl SAfety
a) Power tool plugs must match the 
outlet. Never modify the plug in any 
way. do not use any adapter plugs 
with earthed (grounded) power tools. 
Unmodified plugs and matching outlets will 
reduce risk of electric shock.
b) Avoid body contact with earthed 
or grounded surfaces such as pipes, 
radiators, ranges and refrigerators. There 
is an increased risk of electric shock if your 
body is earthed or grounded.
c) do not expose power tools to rain or 
wet conditionsWater entering a power 
tool will increase the risk of electric shock.
d) do not abuse the cord. Never use the 
cord for carrying, pulling or unplugging 
the power tool. keep cord away from 
heat, oil, sharp edges or moving parts. 
Damaged or entangled cords increase the 
risk of electric shock.
e) When operating a power tool 
outdoors, use an extension cord suitable 
for outdoor use. Use of a cord suitable for 
outdoor use reduces the risk of electric shock.
f) If operating a power tool in a damp 
location is unavoidable, use a ground 
fault circuit interrupter (GfcI) protected 
supply. Use of a GFCI reduces the risk of 
electric shock.
3) PeRSoNAl SAfety
a) Stay alert, watch what you are doing 
and use common sense when operating 
a power tool. do not use a power tool 
while you are tired or under the influence 
of drugs, alcohol or medication. 
moment of inattention while operating power 
tools may result in serious personal injury.
b) use personal protective equipment. 
Always wear eye protection. Protective 
equipment such as dust mask, nonskid 
safety shoes, hard hat, or hearing protection 
used for appropriate conditions will reduce 
personal injuries.
c) Prevent unintentional starting. ensure 
the switch is in the off position before 
connecting to power source and/ or 
battery pack, picking up or carrying the 
tool. Carrying power tools with your finger 
on the switch or energizing power tools that 
have the switch on invites accidents.
d) Remove any adjusting key or wrench 
before turning the power tool on
wrench or a key left attached to a rotating part 
of the power tool may result in personal injury.
e) do not overreach. keep proper footing 
and balance at all times. This enables 
better control of the power tool in 
unexpected situations.
f) dress properly. do not wear loose 
clothing or jewelry. keep your hair, 
clothing and gloves away from moving 
parts. Loose clothes, jewelry or long hair 
can be caught in moving parts.
g) If devices are provided for the 
connection of dust extraction and 
collection facilities, ensure these are 
connected and properly used. Use of 
GeNeRAl PoWeR tool SAfety WARNINGS
SAFETY GUIDELINES - DEFINITIONS
 
It is important for you to read and understand this manual. The information it contains 
relates to protecting YOUR SAFETY and PREVENTING PROBLEMS. The symbols 
below are used to help you recognize this information. 
DANGER: 
Indicates an imminently hazardous situation which, if not avoided, will 
result in death or serious injury.
WARNING:
 
Indicates a potentially hazardous situation which, if not avoided, 
could result in death or serious injury.
CAUTION:
 
Indicates a potentially haz ard ous situation which, if not avoided, may 
result in minor or mod er ate injury.
NOTICE:
 
Used without the safety alert symbol indicates potentially hazardous 
situation which, if not avoided, may result in property damage.