DeWALT D2002M Manuale Utente

Pagina di 56
14
English
GLoSSAry
CfM: Cubic feet per minute.
SCfM:  Standard  cubic  feet  per  minute;  a  unit  of  measure  of  air 
delivery.
PSI: Pounds per square inch; a unit of measure of pressure.
Code  Certification:  Products  that  bear  one  or  more  of  the 
following marks: UL
®
*, CUL, CULUS, ETL
®
*, CETL, CETLUS have 
been evaluated by OSHA certified independent safety laboratories 
and meet the applicable Standards for Safety. 
*  Ul
®
  is  a  registered  trademark  of  Underwriters  laboratories  and 
eTl
®
 is a registered trademark of electrical Testing laboratories.
Cut-In Pressure: While the motor is off, air tank pressure drops 
when accessory is used. When the tank pressure drops to a certain 
low level the motor will restart automatically. The low pressure at 
which the motor automatically restarts is called 
cut-in pressure.
Cut-out  Pressure:  When  an  air  compressor  is  turned  on  and 
begins to run, air pressure in the air tank begins to build. It builds 
to  a  certain  high  pressure  before  the  motor  automatically  shuts 
off, protecting your air tank from pressure higher than its capacity. 
The  high  pressure  at which the  motor shuts  off  is called 
cut-out 
pressure.
Branch Circuit: The circuit carrying electricity from electrical panel 
to outlet.
Duty  Cycle:  This  air  compressor  pump  is  capable  of  running 
continuously. However, to prolong the life of your air compressor, 
it  is  recommended  that  a  50%-75%  average  duty  cycle  be 
maintained; that is, the air compressor pump should not run more 
than 30–45 minutes in any given hour.