Toshiba EO1-33056D Manuale Utente

ENGLISH VERSION EO1-33056 

2.8 Setting an Operating Environment

E2-43 

When the printer is connected to a PC through TCP/IP by using a LAN 
cable, it is necessary to set an IP address in the System Mode for system 
administrators.  
 
The System Mode for system administrators consists of the following 
menus.  
 
 
 
 
 
 
<1>DIAG.  Vx.x 

This menu is used to check and print the printer 
system information and maintenance counter 
status. 

 

<2>PARAMETER SET
 
 
 

This menu is used to set the printer parameters. 

<3>ADJUST SET 

This menu is used to make a fine adjustment of a 
print start position, cut position, etc. 
 
 

<4>TEST PRINT 

This menu is used to perform print tests. 
 
 
 

<5>SENSOR ADJ. 

This menu is used to check the sensor statuses 
and adjust each sensor. 
 
 

<6>RAM CLEAR 

This menu is used to perform a RAM clear.  
DO NOT USE this menu. 
 
 

<7>IP ADDRESS 

This menu is used to set an IP address. 
 
 
 

<8>BASIC 

This menu is used to enable the printer to use 
Basic program. 
 
 

<9>FOR FACTORY 

This menu is intended for an in-process 
inspection.  Do not use this menu.  

 

<1>DIAG.  Vx.x 

<2>PARAMETER SET

<3>ADJUST SET 

<4>TEST PRINT 

<5>SENSOR ADJ. 

<6>RAM CLEAR 

<7>IP ADDRESS 

<8>BASIC 

<9>FOR FACTORY 

Power OFF 

While holding down the 

[FEED] and 

[PAUSE] keys, turn on the printer.