Garmin 725 Manuale Utente

Network Setup

Make sure you follow the instructions on the Start Here sheet to set up your 
product, choose your connection, and install the software. The on-screen 
instructions during the installation process help you set up your network 
connection. 

Follow the instructions in this chapter only if you need additional help:

■

For wireless network setup, see below.

■

For wired network (Ethernet

®

) setup, see page 45.

You must install the software on every computer from which you want to print. 
For the first installation, we recommend using a USB cable (not included) to 
simplify wireless setup. After the printer is connected to the network, you will be 
prompted to remove the cable.

If you are using Mac OS X 10.6 or don’t have a USB cable, you will need to use 
the control panel on the printer to select wireless settings instead.

Note:
If you have trouble setting up your product, see page 49.

■

If this is the first time that you’re installing the product, see “Installing for the 
First Time” on page 38.

■

If your product is already on your wireless network and you need to set up 
additional computers to print to the product, see “Setting Up Additional 
Computers” on page 43.