Garmin 725 ユーザーズマニュアル

Network Setup

Make sure you follow the instructions on the Start Here sheet to set up your 
product, choose your connection, and install the software. The on-screen 
instructions during the installation process help you set up your network 
connection. 

Follow the instructions in this chapter only if you need additional help:

■

For wireless network setup, see below.

■

For wired network (Ethernet

®

) setup, see page 45.

You must install the software on every computer from which you want to print. 
For the first installation, we recommend using a USB cable (not included) to 
simplify wireless setup. After the printer is connected to the network, you will be 
prompted to remove the cable.

If you are using Mac OS X 10.6 or don’t have a USB cable, you will need to use 
the control panel on the printer to select wireless settings instead.

Note:
If you have trouble setting up your product, see page 49.

■

If this is the first time that you’re installing the product, see “Installing for the 
First Time” on page 38.

■

If your product is already on your wireless network and you need to set up 
additional computers to print to the product, see “Setting Up Additional 
Computers” on page 43.