Ricoh 2015 Manuale Utente
11
2. Troubleshooting
Error & Status Messages on the Display
This section describes the principal messages that appear on the display. If a
message not described here appears, act according to the message.
message not described here appears, act according to the message.
Reference
Before turning the main power off, see ‘Turning On the Power’, Copy Refer-
ence.
Before turning the main power off, see ‘Turning On the Power’, Copy Refer-
ence.
❖
❖
❖
❖ Status messages
Message
Status
Hex Dump Mode
In Hex Dump mode, the machine prints received data in hexa-
decimal format. After printing, turn off the machine and then
back on again. Hex Dump mode is used for advanced trouble-
shooting.
decimal format. After printing, turn off the machine and then
back on again. Hex Dump mode is used for advanced trouble-
shooting.
Offline
The machine is offline. To start printing, switch the machine
online by pressing
online by pressing
{{{{Online}}}} on the control panel.
Please wait.
Wait a while.
Printing...
The machine is printing. Wait a while.
Ready
This is the default ready message. The machine is ready for
use. No action is required.
use. No action is required.
Resetting job...
The machine is resetting the print job. Wait until “Ready” ap-
pears on the display.
pears on the display.
Setting change…
The machine settings are being changed. Wait a while.
Waiting...
The machine is waiting for the next data to print. Wait a while.