Ricoh 2015 Benutzerhandbuch

11

This section describes the principal messages that appear on the display. If a
message not described here appears, act according to the message.

Reference
Before turning the main power off, see ‘Turning On the Power’, Copy Refer-
ence.

❖

❖

❖

❖ Status messages

Hex Dump Mode

In Hex Dump mode, the machine prints received data in hexa-
decimal format. After printing, turn off the machine and then 
back on again. Hex Dump mode is used for advanced trouble-
shooting.

Offline

The machine is offline. To start printing, switch the machine 
online by pressing 

{{{{Online}}}} on the control panel.

Please wait.

Wait a while.

Printing...

The machine is printing. Wait a while.

Ready

This is the default ready message. The machine is ready for 
use. No action is required.

Resetting job...

The machine is resetting the print job. Wait until “Ready” ap-
pears on the display.

Setting change…

The machine settings are being changed. Wait a while.

Waiting...

The machine is waiting for the next data to print. Wait a while.