Miranda Camera Co M406-9900-402 Manuale Utente

Kaleido K2  |  11  

 

Green indicates that the unit is properly powered and that one or both power supplies are 
on. 

   

 

 

Red indicates a stand-by mode: the unit is plugged in but the Controller is not switched on.

 

 

CPU Reset switch: 

If the Controller is not working properly, it can be reset using this switch without the need 
to remove the front panel. Use a paper clip through the hole to depress the reset switch. 

 
 
CPU status LED: 

This LED reports the current operational status of the module, as follows: 

  

When 

turned 

Off,  the Controller is not ready (in boot-up mode). 

  

A 

blinking yellow / green LED indicates normal operation. 

 

 

When the LED is not blinking (static yellow or green), an error has occurred. 

 

 

 

 

Indicates the presence and validity of the Reference (genlock) signal 

 

 

Off indicates that no valid reference input signal is present 

 

 

Green indicates that a valid reference input signal is present 

 

 

Flashing Red indicates a live update is in progress 

 
LTC IN LED: 

 

Indicates the presence and validity of the LTC signal. 

 

 

Green indicates a valid LTC signal. 

 

 

Red indicates a invalid signal. 

 
LAN LED:  

turns 

green to indicate that an Ethernet network has been detected, and flashes yellow 

when there is activity on the network. 

 
USB connector: 

this connector duplicates the functionality of the rear-panel USB port, but is more 
conveniently accessible for maintenance purposes when Kaleido-K2 is mounted in a rack. 

 
 

 

 

 
In the event that the Controller module fails, the Kaleido-K2 will continue to display the incoming video feeds at its 
output in the most recent configuration.