Maxtor STM3200820A Manuale Utente
DiamondMax 21 PATA Product Manual, Rev. B
17
2.9.5
Shock
All shock specifications assume that the drive is mounted securely with the input shock applied at the drive
mounting screws. Shock may be applied in the X, Y or Z axis.
mounting screws. Shock may be applied in the X, Y or Z axis.
2.9.5.1
Operating shock
320GB - 200GB models
These drives comply with the performance levels specified in this document when subjected to a maximum
operating shock of 68 Gs based on half-sine shock pulses of 2 msec. Shocks should not be repeated more
than two times per second.
operating shock of 68 Gs based on half-sine shock pulses of 2 msec. Shocks should not be repeated more
than two times per second.
160GB - 80GB models
These drives comply with the performance levels specified in this document when subjected to a maximum
operating shock of 63 Gs based on half-sine shock pulses of 2 msec. Shocks should not be repeated more
than two times per second.
operating shock of 63 Gs based on half-sine shock pulses of 2 msec. Shocks should not be repeated more
than two times per second.
2.9.5.2
Nonoperating shock
The nonoperating shock level that the drive can experience without incurring physical damage or degradation
in performance when subsequently put into operation is 350 Gs based on a nonrepetitive half-sine shock pulse
of 2 msec duration.
in performance when subsequently put into operation is 350 Gs based on a nonrepetitive half-sine shock pulse
of 2 msec duration.
2.9.6
Vibration
All vibration specifications assume that the drive is mounted securely with the input vibration applied at the
drive mounting screws. Vibration may be applied in the X, Y or Z axis.
drive mounting screws. Vibration may be applied in the X, Y or Z axis.
2.9.6.1
Operating vibration
The following table lists the maximum vibration levels that the drive may experience while meeting the perfor-
mance standards specified in this document.
mance standards specified in this document.
2.9.6.2
Nonoperating vibration
The following table lists the maximum nonoperating vibration that the drive may experience without incurring
physical damage or degradation in performance when subsequently put into operation.
physical damage or degradation in performance when subsequently put into operation.
5–22 Hz
0.25 G (limited displacement)
22–350 Hz
0.50 G
350–500 Hz
0.25 G
5–22 Hz
0.25 G (limited displacement)
22–350 Hz
5.0 G
350–500 Hz
1.0 G