Smartdisk Portable Hard Drive Manuale Utente

 

  4

FotoChute has an internal time of day clock that it uses for applying 
time stamps to various folder names. Before you begin to copy files 
using FotoChute, use the following steps to set the date and time. 

1.  Locate the Power Switch on the side of your FotoChute and 

slide it to the ON position.  

2.  From the Main Menu, press the Down button three times to 

highlight Information, and then press Select. 

3.  Press the Down button twice to highlight Set Time, and then 

press Select. 

4.  Use the Up and Down buttons to change the date or time 

value, and use the Left and Right buttons to move to the next 
date or time field. 

5.  After you finish setting both date and time, press the 

OK/Copy button. When prompted to confirm, press the 
OK/Copy button to save the new settings, or Left to cancel. 

USB OTG provides for two ways to connect to other USB ports. 
When you want to connect to a PC or Mac to transfer files between 
FotoChute and the computer, you must connect to that computer 
through FotoChute’s USB Device port, which uses the attached USB 
A-Plug. 

When you want to copy data from a supported camera, flash disk or 
memory card reader, you must connect to that device through 
FotoChute’s USB Host port, which uses the USB A-Jack.