Toshiba NC1 Manuale Utente

Indicates that high voltage is still 
present within the inverter. Do not 
open the cover while this is lit. 

Lights when an ON command  
is issued but no frequency signal  
is sent out. It blinks when operation  
is started. 

Displays operating frequencies, 
parameter, and error messages. 

Pressing of the STOP key while 
the RUN key lamp is on will cause 
a slowdown-stop.

Pressing the up key when lamp is 
on allows the operating frequency 
to be seen. 

Pressing the down key when lamp 
is on allows the operating frequency 
to be seen. 

Lights when the inverter is in 
parameter setting mode.  This lamp 
blinks when the parameter “AUH”  
or “Gr.U” is selected. 

Displays the operating frequency, 
parameter information, a monitored 
item, the cause of a failure,  
and so on.