Cisco Systems 1552H Manuale Utente
4-4
Cisco Aironet 1550 Series Outdoor Mesh Access Point Hardware Installation Guide
OL-24247-01
Chapter 4 Installing or Replacing the Backup Battery
Removing a Backup Battery
Removing a Backup Battery
To remove a backup battery, follow these steps:
Step 1
While holding the access point cover open, carefully disconnect the backup battery cable from the
internal connector (see
internal connector (see
). Be careful not to touch the radio board components.
Figure 4-2
Battery Backup Location
Step 2
Carefully place the cover onto your static-protected table.
1
Backup battery
3
Internal connector for the backup battery cable
2
Backup battery cable
4
Radio boards (Do not touch)