HP (Hewlett-Packard) 230859-004 Manuale Utente
IMPORTANT: The DHCP server assigns the IP address to the iLO NIC. The DHCP
server is not necessary if you have configured iLO and/or any other connected NICs to
use a static IP address.
server is not necessary if you have configured iLO and/or any other connected NICs to
use a static IP address.
To connect with the network cabling method:
1. Follow steps 1 through 7 of “Using the Direct Cabling Method with a Client PC”
to make the connections from the server blade to the diagnostic station.
WARNING: To avoid electric shock, be sure that the AC power is disconnected
from the diagnostic station when connecting cables to the server blade.
from the diagnostic station when connecting cables to the server blade.
2. Connect the network cable with RJ-45 connectors to the diagnostic station NIC 4
connector (1) and to the hub (2).
3. Connect the AC power cord to the diagnostic station (3).
NOTE: Previously installed components have been removed for clarity.
Depending on which server blade you are using, you may need to install a second power
supply in the diagnostic station. A second power cord would also be required.
supply in the diagnostic station. A second power cord would also be required.
Figure 15: Connecting a network cable and the AC
power cord to the diagnostic station
power cord to the diagnostic station
HP ProLiant BL p-Class System Diagnostic Station User Guide
27