HP (Hewlett-Packard) 230859-004 Manuale Utente

 

Figure 17 shows a completed network cabling method with the DHCP server (1) and 
the hub (2). 

 

IMPORTANT:  For operating system deployment or file management, an optional server can 
be connected to the hub. 

 

NOTE:  Connecting the diagnostic cable to the diagnostic port or connecting the local I/O 
cable to the I/O port automatically disables the iLO connection on the rear of the diagnostic 
station. 

 

 

NOTE:  Your completed configuration may look different, depending on which server blade 
you are using.  

After the network cabling method is complete, the server blade and diagnostic station 
are ready for use. See the “Powering Up the Server Blade” section. 

To power up the server blade: 

1.  Power up the diagnostic station by pressing the Power On/Off button. 

2.  Power up the server blade.