HP (Hewlett-Packard) 230859-004 Manuale Utente

 

In this method, the client PC is connected to the iLO using a hub/switch and the 
network connections of the diagnostic station. The iLO default configuration enables 
the server blade to obtain its IP address from a DHCP server. 

 

NOTE:  If you have edited the configuration to use a static IP address, iLO uses this same 
static IP address when you connect with the network cabling method. 

To access iLO, you need some basic connection information: 

• 

The TCP/IP address or DNS/WINS name of the iLO 

—  When using the direct cabling method, use the 192.168.1.1 for the TCP/IP 

address and 255.255.255.0 for the subnet mask. 

—  When using the network cabling method, look on the iLO Default Network 

Settings tag for first time access. 

• 

A valid user ID and password with appropriate iLO privileges for accessing 
Remote Console 

This information is also available on the iLO Default Network Settings tag for 
initial access information. 

Be sure that the IP address and subnet mask of the client PC are compatible with the 
IP address and subnet mask of the iLO diagnostic port. In addition, be sure that the 
browser bypasses any proxy servers for the IP address or DNS/WINS name of the 
iLO.