Fujitsu H22-1W Manuale Utente

 SCALEOVIEW 

H22-1W 

Should an error occur, first check the following points. If the distortion is still not eliminated, the 
monitor should, if possible, be checked on another computer. 
If you are unable to solve the problem, please inform our help desk. 

No screen display 
(power indicator does not light) 

► 

Check whether the monitor is switched on. 

► 

Check whether the power cable on the monitor is 
connected correctly. 

► 

Check whether the computer is switched on. 

No screen display 
(power indicator lights) 

► 

Check whether the computer is switched on. 

► 

Check whether the data cable for the monitor is 
correctly attached to the monitor port on the computer. 

► 

Press any key on the computer keyboard – the 
computer may be in energy saving mode. 

► 

Alter the brightness and/or contrast until you get a 
picture. 

Message: 

No Signal 

► 

Check whether the data cable for the monitor is 
correctly attached to the monitor port on the computer. 

► 

Check whether the computer is switched on. 

Message: 

Frequency out of range: 

 ## kHz / ## Hz 
Please change the display 

mode to 1680 x 1050  with 

60 Hz. 

The input signal (horizontal frequency and refresh rate) at 
the displayed input does not correspond to the technical 
monitor data. 
► 

Adjust the video frequency range using the computer 
software (see documentation for your computer or 
your graphics card). 

Message: 

For best picture quality, 

please change resolution to 

1680 x 1050 . 
SELECT: Disable EXIT: Clear 

► 

Set the resolution to 1680 x 1050  using the computer 
software. 

A26361-K1118-Z120-1-7619, edition 3 

21