Fujitsu H22-1W Manuale Utente
SCALEOVIEW H22-1W
Having this problem?
Check the following points:
Picture position not correct
The monitor recognises an undefined mode (see the
"Technical data" chapter).
►
"Technical data" chapter).
►
Press the EXIT/AUTO button to perform the auto-
adjustment of the screen.
adjustment of the screen.
►
Set the picture position with the OSD menu (see the
"Operation of the monitor" chapter).
"Operation of the monitor" chapter).
Picture is shaking
►
Check whether the data cable for the monitor is
correctly attached to the monitor port on the computer.
correctly attached to the monitor port on the computer.
►
Press the EXIT/AUTO button to perform the auto-
adjustment of the screen.
adjustment of the screen.
Picture is wrongly adjusted
►
Press the SELECT/MENU button to activate the
function Factory Recall. The Auto Processing message
is displayed.
function Factory Recall. The Auto Processing message
is displayed.
Picture disturbances (vertical lines)
►
Press the EXIT/AUTO button to perform the auto-
adjustment of the screen.
adjustment of the screen.
Picture disturbances
(horizontal lines, picture noise)
(horizontal lines, picture noise)
►
Press the EXIT/AUTO button to perform the auto-
adjustment of the screen.
adjustment of the screen.
The screen becomes darker
The background lighting has a limited lifetime. If your
monitor display should become too dark, the background
lighting will have to be exchanged.
►
monitor display should become too dark, the background
lighting will have to be exchanged.
►
Please contact our help desk.
22
A26361-K1118-Z120-1-7619, edition 3