NEC PD17062 Manuale Utente

µ

Name

Description

The following support tools are available for developing programs for the 

µ

PD17062.

The IE-17K, IE-17K-ET, and EMU-17K are in-circuit emulators applicable to the 17K

series.

The IE-17K and IE-17K-ET are connected to the PC-9800 series (host machine) or

IBM PC/AT

TM

 

through the RS-232-C interface.  The EMU-17K is inserted into the

extension slot of the PC-9800 series (host machine).

Use the system evaluation board (SE board) corresponding to each product together

with one of these in-circuit emulators.  SIMPLEHOST

TM

, a man machine interface,

implements an advanced debug environment.

The EMU-17K  also enables user to check the contents of the data memory in real

time.

The SE-17002 is an SE board for the 

µ

PD17002 and 

µ

PD17062.  It is used solely for

evaluating the system.  It is also used for debugging in combination with the in-circuit

emulator.

The EP-17002CU is an emulation probe for the 48-pin shrink DIP (600 mil).  It is used

to connect the SE board and the target system.

The EP-17002GC is an emulation probe for the 64-pin QFP (14 

×

 14 mm).  It is used

with EV-9400GC-64

 to connect the SE board to the target system.

The EV-9200GC-64 is a conversion socket used to connect the EP-17002GC to the

target system.

In-circuit emulator

IE-17K

IE-17K-ET

EMU-17K

SE board

(SE-17002)

Emulation probe

(EP-17002CU)

Emulation probe

(EP-17002GC)

Conversion socket

(EV-9200GC-64

)

Notes 1. Low-end model, operating on an external power supply

2. The EMU-17K is a product of IC Co., Ltd.  Contact IC Co., Ltd.  (Tokyo, 03-3447-3793) for details.

3. The EP-17002GC is supplied together with one EV-9200GC-64.  A set of five EV-9200GC-64 is also

available.