Motorola MVME162 Manuale Utente
Hardware Preparation and Installation
2-4
MVME162 Embedded Controller Installation Guide
2
Figure 2-2. Serial Interface Module, Connector Side
Removal of Existing SIM
1.
Each serial interface module is retained by two 4-40 x
3
/
16
” Phillips-head
screws in opposite corners. Remove the two screws and store them in a
safe place for later use.
safe place for later use.
2.
Grasp opposite sides of the SIM and gently lift straight up.
C
aution
Avoid lifting the SIM by one side only, as the connector can
be damaged on the SIM or the main board.
be damaged on the SIM or the main board.
3.
Place the SIM in a static-safe container for possible reuse.
Table 2-1. Serial Interface Module Part Numbers
EIA
Standard
Configuration
Part Number
Model
Number
EIA-232-D
DTE
01-W3846B
SIM05
DCE
01-W3865B
SIM06
EIA-530
DTE
01-W3868B
SIM07
DCE
01-W3867B
SIM08
10922.00 9403 (2-2)
SECONDARY SIDE
39
1
40
2
J1