Intel D95738-001US Manuale Utente

Pagina di 88
Product Description 
 15
 
1.2 
Legacy Considerations 
This board differs from other Intel Desktop Board products, with specific changes 
including (but not limited to) the following: 
•  No parallel port 
•  No floppy drive connector 
•  No serial port on the back panel 
•  The serial port header is located near the memory sockets and may require a 
specialized chassis or cabling solution to use  
1.3 
Online Support 
To find information about…  
Visit this World Wide Web site: 
Intel
®
 Desktop Board DG33TL  
Desktop Board Support 
Available configurations for the 
Desktop Board DG33TL 
Supported processors 
 
Chipset information 
BIOS and driver updates 
 
1.4 
Processor 
The board is designed to support the following processors: 
•  Intel Core 2 Quad processor in an LGA775 socket with a 1066 MHz system bus 
•  Intel Core 2 Duo processor in an LGA775 socket with a 1333 or 1066 or 800 MHz 
system bus 
•  Intel Pentium Dual-Core processor in an LGA775 socket with an 800 MHz 
system bus 
•  Intel Celeron processor in an LGA775 socket with an 800 MHz system bus 
Other processors may be supported in the future. This board is designed to support 
processors with a maximum wattage of 105 W.  The processors listed above are only 
supported when falling within the wattage requirements of the DG33TL board.  See 
the Intel web site listed below for the most up-to-date list of supported processors. 
 
For information about…  
Refer to: 
Supported processors 
 CAUTION 
Use only the processors listed on the web site above.  Use of unsupported processors 
can damage the board, the processor, and the power supply.   
#
 
INTEGRATOR’S NOTE 
Use only ATX12V-compliant power supplies.  
For information about  
Refer to 
Power supply connectors 
Section 2.2.2.4, page 49