Lucent Technologies partner voice messaging card Manuale Utente
2.
3.
4.
B) Disconnect the power cord from the power jack on your installation.
If you have a standalone or a 2-Slot carrier, skip
to Step 3. If you have a 5-Slot carrier, continue
with Step 2A.
A) Loosen the screw on the lower front of the
cover. Then place one hand on the handle on
the lower front and place your other hand on
the top of the cover.
the lower front and place your other hand on
the top of the cover.
B ) Gently pull the cover up and away from the carrier.
To insert the PARTNER Voice Messaging PC
Card, hold it with the Lucent Technologies label
facing to the right, and slide it gently into one of
the PC card slots on the PARTNER ACS
processor module. When inserted properly, the
PARTNER Voice Messaging PC Card projects
about 1-5/8" (4 cm) from the module.
Card, hold it with the Lucent Technologies label
facing to the right, and slide it gently into one of
the PC card slots on the PARTNER ACS
processor module. When inserted properly, the
PARTNER Voice Messaging PC Card projects
about 1-5/8" (4 cm) from the module.
To remove the PC card, gently pull straight out
(with the power off).
Power up the system:
A)
Reconnect the power cord.
B) If you have a 5-Slot carrier, move the carrier's On/Off switch to the
"On" position ("—").