Lucent Technologies partner voice messaging card Manuale Utente

This section provides the following information:

■

■

Initial settings for the communications system and PARTNER Voice
Messaging when the PARTNER Voice Messaging PC Card is installed

General instructions for programming PARTNER Voice Messaging followed
by instructions for changing the initial PARTNER Voice Messaging settings

The order of the procedures in this section enables you to record the general
mailbox greeting and change the assignments for the mailboxes before

PARTNER Voice Messaging begins to handle calls—this order is
recommended to ensure that calls are handled correctly for the subscribers

who require voice mail coverage.

In the following step-by-step instructions, note that Step 1 of each procedure

for the voice messaging system is logging into PARTNER Voice Messaging.
However, if you are already logged into PARTNER Voice Messaging, you can
skip Step 1.

When the PARTNER Voice Messaging PC Card is installed in the PARTNER
ACS processor module (see "Installation Instructions" on page 11) and the
system is powered up, some settings are established for both PARTNER Voice
Messaging and the PARTNER ACS system.

If you want to make changes to the initial settings for PARTNER Voice
Messaging, use the instructions in "Using PARTNER Voice Messaging System

Programming" on page 17. If you want to make changes to the initial
PARTNER ACS settings, use the instructions in "PARTNER ACS Programming"
on "PARTNER ACS Programming" on page 24.