Toshiba GA-1190 Manuale Utente

Network Setting Checklists 45

Network Setting Checklists

When a computer cannot print data to this equipment through a network, check if the settings
are correctly made according to Chapter 1 “EASY SETUP FLOW” by referring to the checklists
shown below. The checklist covers major printing setting items explained in Chapter 1 “EASY
SETUP FLOW”.

Raw TCP or LPR printing in a Windows operating system environment:

IPP printing in a Windows operating system environment:

No.

Check Item

Yes

Countermeasure

Are the IP Address proper-
ties correctly set?

Next Step

Set up the IP address correctly.

Is the Raw TCP Printing
correctly set?

Next Step

Set up the Raw TCP print service
correctly.

Is the LPR/LPD Printing cor-
rectly set?

Next Step

Set up the LPD print service cor-
rectly.

Were the proper printer driv-
ers installed?

Next Step

See the Printing Guide to install
proper printer drivers.

Is the Raw TCP or LPR port
configured with correct IP
address?

Next Step

See the Printing Guide to config-
ure the proper port.

Can you print to this equip-
ment?

End

Refer to the following section to
troubleshoot the condition.

P.55 “Cannot print data to this

equipment”

No.

Check Item

Yes

Countermeasure

Are the IP Address proper-
ties correctly set?

Next Step

Set up the IP address correctly.

Is the HTTP Server on this
equipment enabled?

Next Step

Enable the HTTP server in the
HTTP Network Service.

Is the IPP Printing correctly
set?

Next Step

Set up the IPP print service cor-
rectly.

Were the proper printer driv-
ers installed?

Next Step

See the Printing Guide to install
proper printer drivers.

Is the IPP port configured
with correct URL?

Next Step

See the Printing Guide to config-
ure proper port.

Can you print to this equip-
ment?

End

Refer to the following section to
troubleshoot the condition.

P.55 “Cannot print data to this

equipment”