Dialogic 6.2 Manuale Utente

Wink Start & Delay Dial Signaling

November 2009

277

The remaining settings are described in the context of incoming and 

outgoing calls in the subsections that follow. Brooktrout modules 

process calls in the same manner on both wink start and delay dial 

trunks.

During an incoming call, the host receives an L3L4mPRE_SEIZE 

message if send_preseize_event = 1 in the IISDN_ROBBED_BIT_

DATA structure. This message is sent when the module detects an 

incoming seizure (off hook). The module automatically responds to 

the seizure by sending a wink signal, indicating it is ready to receive 

digits. The maximum number of digits the module expects to receive 

must be specified in the max_incoming_digit_count field. The digits 

are reported to the host in an L3L4mSETUP_IND message. To 

answer the call, the host must issue an L4L3mCONNECT_

REQUEST message.

 shows how a Brooktrout module processes an incoming 

call received over a wink start or delay dial trunk.