Dialogic 6.2 Manuale Utente

Wink Start & Delay Dial Signaling

November 2009

279

During an outgoing call, the host receives an L3L4mPROGRESS in 

response to the L4L3mCALL_REQUEST to start the call. The host 

then receives an L3L4mSEIZE_COMP message if send_seize_comp_

event = 1 in the IISDN_ROBBED_BIT_DATA structure. This 

message is sent when the module detects a wink from the network, 

indicating the network is ready to receive digits. After the digits are 

transmitted, the module waits for answer supervision from the 

network (indicating the far end has gone off hook) or for an answer 

timer to expire (if timed_answer_supervision = 1). When answer 

supervision is received or the timer expires, the host receives an 

L3L4mCONNECT indicating the call is connected.

 shows how the module makes an outgoing call over a wink 

start or delay dial trunk.

For an incoming call teardown, refer to 

 at the 

end of this section; for an outgoing call teardown, refer to 

 at the end of this section.