Panasonic KX-FT934HK Manuale Utente
9. Help
31
9 Help
9.1 Error messages – Reports
If a problem occurs during fax transmission or reception, one of the following messages will be printed on the sending
and journal reports (page 18).
and journal reports (page 18).
9.2 Error messages – Display
If the unit detects a problem, one or more of the following messages will appear on the display.
Message
Code
Cause & Solution
COMMUNICATION ERROR
40-42
46-72
46-72
FF
L
A transmission or reception error occurred. Try
again or check with the other party.
again or check with the other party.
43
44
44
L
A line problem occurred. Connect the telephone line
cord to a different jack and try again.
cord to a different jack and try again.
L
An overseas transmission error occurred. Try using
the overseas mode (feature #23 on page 27).
the overseas mode (feature #23 on page 27).
DOCUMENT JAMMED
-----
L
The document is jammed. Remove the jammed
document (page 36).
document (page 36).
ERROR-NOT YOUR UNIT
53
54
59
70
54
59
70
L
A transmission or reception error occurred because
of a problem with the other party’s fax machine.
Check with the other party.
of a problem with the other party’s fax machine.
Check with the other party.
MEMORY FULL
-----
L
The memory is full of received documents due to a
lack of recording paper or a recording paper jam.
Install paper (page 4) or clear the jammed paper
(page 36).
lack of recording paper or a recording paper jam.
Install paper (page 4) or clear the jammed paper
(page 36).
NO DOCUMENT
-----
L
The document was not fed into the unit properly. Re-
insert it and try again.
insert it and try again.
OTHER FAX NOT RESPONDING
-----
L
The other party’s fax machine is busy or has run out
of recording paper. Try again.
of recording paper. Try again.
L
The other party’s fax machine rings too many times.
Send the fax manually (page 18).
Send the fax manually (page 18).
L
The other party’s machine is not a fax machine.
Check with the other party.
Check with the other party.
L
The number you dialled is not in service.
PRESSED THE STOP KEY
-----
L {
STOP} was pressed, and fax transmission or
reception was cancelled.
OK
-----
L
Fax transmission or reception was successful.
Display
Cause & Solution
“
CALL SERVICE”
L
There is something wrong with the unit. Contact our service personnel.
“
CHECK DOCUMENT”
L
The document was not fed into the unit properly. Re-insert the document. If
misfeeding occurs frequently, clean the document feeder rollers (page 37)
and try again.
misfeeding occurs frequently, clean the document feeder rollers (page 37)
and try again.
L
Attempted to send a document longer than 600 mm. Press {STOP} to
remove the document. Divide the document into two or more sheets and try
again.
remove the document. Divide the document into two or more sheets and try
again.
“
CHECK MEMORY”
L
Memory (telephone numbers, parameters, etc.) has been erased. Re-
program.
program.
FT932_934HK-PFQX2561YA-en.book Page 31 Monday, May 8, 2006 5:05 PM