Panasonic KX-FT934HK Manuale Utente
9. Help
32
“
COVER OPEN”
“
CHECK PAPER”
L
The cover is open. Close it and press {FAX/START} to clear the message.
L
The unit has run out of recording paper. Install recording paper (page 4) and
press {FAX/START} to clear the message.
press {FAX/START} to clear the message.
“
FAX IN MEMORY”
L
The unit has a document in memory. See the other displayed message
instructions to print out the document. For fax memory capacity, see page
39.
instructions to print out the document. For fax memory capacity, see page
39.
“
FAX MEMORY FULL”
L
The memory is full of received documents due to a lack of recording paper
or a recording paper jam. Install paper (page 4) or clear the jammed paper
(page 36).
or a recording paper jam. Install paper (page 4) or clear the jammed paper
(page 36).
L
When performing broadcast transmission, the document being stored
exceeded the memory capacity of the unit. Send the entire document
manually.
exceeded the memory capacity of the unit. Send the entire document
manually.
“
MEMORY FULL”
L
There is no space to store new items in the phonebook. Erase unnecessary
items (page 13).
items (page 13).
“
MODEM ERROR”
L
There is something wrong with the unit’s modem. Contact our service
personnel.
personnel.
“
NO FAX REPLY”
L
The other party’s fax machine is busy or has run out of recording paper. Try
again.
again.
“
PAPER JAMMED”
L
A recording paper jam occurred. Clear the jammed paper (page 36).
“
PLEASE WAIT”
L
The unit is checking and initializing the paper cutter. Wait for a moment
while the check is completed.
while the check is completed.
“
POLLING ERROR”
L
The other party’s fax machine does not support polling. Check with the
other party.
other party.
“
REDIAL TIME OUT”
L
The other party’s fax machine is busy or has run out of recording paper. Try
again.
again.
“
REMOVE DOCUMENT”
L
The document is jammed. Remove the jammed document (page 36).
L
Press {STOP} to eject the jammed document.
“
SYSTEM IS BUSY”
L
The system is busy. Replace the handset or stop using monitor, then try
again.
again.
“
TRANSMIT ERROR”
L
A transmission error occurred. Try again.
“
UNIT OVERHEATED”
L
The unit is too hot. Stop using the unit for a while and let the unit cool down.
Display
Cause & Solution
FT932_934HK-PFQX2561YA-en.book Page 32 Monday, May 8, 2006 5:05 PM