Pinnacle PCTV SAT CI PCI DVB-S DE EN NL Ret +rem 202261451 Manuale Utente
Codici prodotto
202261451
86
PCTV Sat (CI)
C
ONFIGURING YOUR SATELLITE SYSTEM
When you click on the Dish config button in the lower part of the SatFinder
window, you will be able to carry out all the settings necessary for the
trouble-free operation of your satellite system together with the peripheral
devices. The following dialogue box will appear:
window, you will be able to carry out all the settings necessary for the
trouble-free operation of your satellite system together with the peripheral
devices. The following dialogue box will appear:
Select this option if your PCTV Sat-Board is directly connected to an
individual satellite dish/antenna that can only receive an orbital
position/antenna signal and does not support switching commands
(polarization, frequency band, satellite position). Also enter the desired
satellite.
individual satellite dish/antenna that can only receive an orbital
position/antenna signal and does not support switching commands
(polarization, frequency band, satellite position). Also enter the desired
satellite.
If your PCTV Sat-Board is connected to a satellite system with two LNBs
and multi-switch and the system is Toneburst-capable, select this option to
switch between the LNBs (satellites).
Also enter the desired satellites for LNB A and LNB B.
and multi-switch and the system is Toneburst-capable, select this option to
switch between the LNBs (satellites).
Also enter the desired satellites for LNB A and LNB B.
If your PCTV Sat-Board is connected to a system that has two satellite
dishes with two LNBs each and a DiSEqC 1.0-capable multi-switch, select
this option and enter the desired settings for both dishes and the four LNBs.
dishes with two LNBs each and a DiSEqC 1.0-capable multi-switch, select
this option and enter the desired settings for both dishes and the four LNBs.
Low Band / High Band
With some LNBs, the value of the intermediate frequency that is output is
not the same as the standard value due to manufacturing tolerances. With
branded LNBs you can read off this value directly and if necessary correct it
here.
With some LNBs, the value of the intermediate frequency that is output is
not the same as the standard value due to manufacturing tolerances. With
branded LNBs you can read off this value directly and if necessary correct it
here.
No DiSEqC
Tone burst
(Mini DiSEqC)
DiSEqC
Level 1.0
LNB Offsets
(MHz)