Pinnacle PCTV SAT CI PCI DVB-S DE EN NL Ret +rem 202261451 User Manual

  PCTV Sat (CI) 

When you click on the Dish config button in the lower part of the SatFinder 
window, you will be able to carry out all the settings necessary for the 
trouble-free operation of your satellite system together with the peripheral 
devices. The following dialogue box will appear:  

 

 

Select this option if your PCTV Sat-Board is directly connected to an 
individual satellite dish/antenna that can only receive an orbital 
position/antenna signal and does not support switching commands 
(polarization, frequency band, satellite position). Also enter the desired 
satellite. 
 

If your PCTV Sat-Board is connected to a satellite system with two LNBs 
and multi-switch and the system is Toneburst-capable, select this option to 
switch between the LNBs (satellites). 
Also enter the desired satellites for LNB A and LNB B. 

 

If your PCTV Sat-Board is connected to a system that has two satellite 
dishes with two LNBs each and a DiSEqC 1.0-capable multi-switch, select 
this option and enter the desired settings for both dishes and the four LNBs. 
 

 

Low Band / High Band 
With some LNBs, the value of the intermediate frequency that is output is 
not the same as the standard value due to manufacturing tolerances. With 
branded LNBs you can read off this value directly and if necessary correct it 
here.