Axis VT CEILING BRACKET INT CABLE WCM4A 0217-051 Manuale Utente

Codici prodotto
0217-051
Pagina di 12
 
 Videotec Verso Outdoor Housing   Axis Communications             
 
Application Note        
To help the housing cope with this extra heat, it is possible to install the optional 
0217-131 VT BLOWER KIT WITH AIR FILTER OHPVCF1 combination. This 
will increase the maximum ambient temperature by 5 °C to 45 °C when using the 
Verso together with the AXIS 211 Network Camera. The downside of using this 
accessory is that the IP rating is lowered because of the openings, which are 
needed to vent outside air into the housing to cool it. (See 3.1 for more details).  
 
When installing a network camera in an outdoor housing, it is also important to 
avoid placing the housing in a location where the housing is exposed to direct 
sunlight for many hours a day. Direct sunlight will add a significant amount of 
heat to the housing and this can cause the network camera to malfunction. If the 
Verso is installed in direct sunlight, the maximum ambient temperature of the 
Verso housing together with the AXIS 211 is decreased by approximately 10 to 
15 °C (i.e. maximum ambient temperature is 25 to 30 °C when placed in direct 
sunlight). 
 
2.3 Brackets 
 
The Verso outdoor housing offers several different brackets for different 
mounting options on walls, ceilings, columns etc. They can be divided into two 
groups: with and without internal cable channel. 
 
The benefit of using a bracket with internal cable channel is that the cable is 
protected and hidden away from view. This can be both aesthetically pleasing and 
helpful in protecting the installation from vandalism. (An exposed cable can be 
easily pulled or cut.) The down side of using brackets with internal cable channels 
is that the IP rating is decreased (see 3.1 for further information). Brackets 
without internal cable channel leave the cables exposed but retains the higher IP66 
rating. 
 
2.4  Pole and Corner mount adapters 
 
The 0217-081 VT POLE MOUNT ADAPTER WSFPA and the  
0217-10 VT CORNER MOUNT WCWA are available if the installation requires 
the housing to be mounted on a pole or in a corner. These adapters are used as a 
mounting point for a normal wall bracket. The pole and corner mount adapters are 
compatible with the following brackets: 
 
Part No 
Product Name 
0217-021 
VT WALLBRACKET BALLJOINT WBJA 
0217-031 
VT WALLBRACKET INTERNA CABLE WBOVA1 
 
Rev: 
1.01, 
Last 
updated: 
2004-08-26 
       6