Axis VT CEILING BRACKET INT CABLE WCM4A 0217-051 Manuale Utente

 

 Videotec Verso Outdoor Housing   Axis Communications             

Application Note        

 

The housing internal heater (always included) and optional 0217-011 VT POWER 
SUPPLY OHEPS19 run on mains power (110/230VAC).  
 
The 0217-011 VT POWER SUPPLY OHEPS19 is suitable for powering power 
the Axis 211 Network Camera and as well as the optional 0217-131 VT 
BLOWER KIT WITH AIR FILTER OHPVCF1 
 
Power consumption for the heater is 40 W maximum during cold conditions.  
 
Note: If the housing is powered with 110/120 VAC it is not possible to install the 
optional 0217-131 VT BLOWER KIT WITH AIR FILTER OHPVCF1 
combination due to the increased power required by the blower. 

 

It is recommended that a licensed electrician is consulted to ensure that the 
electrical installation meets local laws and regulations. 

 

 

 

This 12 V DC power supply is specifically designed to be easily mounted 
internally in the Verso housing and is suitable for powering the AXIS 211 
Network Camera. 
 
Important: This power supply cannot be used to power the AXIS 2120 or 
2420 Network Cameras. 

 

This waterproof junction box can be used to install and protect wireless 
devices, routers, wiring harnesses and other auxiliary equipment that are 
required by the application. The junction box is waterproof to IP55 and 
comes equipped with four PG9 cable glands. 
 
 
 
 
 
 
 

       7