Compaq Infortrend Manuale Utente

 

A pull-down list of supported RAID levels will
appear.  In this chapter, RAID 5 will be used to
demonstrate the configuration process.  Choose a
RAID level for this logical drive.
 

Choose your member drive(s) from the list of available physical
drives.  The drives can be tagged for inclusion by positioning the
cursor bar on the drive and then pressing [ENTER].  An asterisk (

∗

)

mark will appear on the selected physical drive(s).  To deselect the
drive, press [ENTER] again on the selected drive.  The “

∗

” mark will

disappear.  Use 

↑↑↑↑

↓↓↓↓

 keys to select more drives.

After all member drives have been selected, press ESC to continue
with the next option.  A list of array options is displayed.

As a rule, a logical drive should be composed of drives of the same
capacity.  A logical drive can only use the capacity of each drive up
to the maximum capacity of the smallest drive.