Compaq Infortrend Manuale Utente
Infortrend
7-8
Initialization Mode
This sub-menu allows you to set if the logical drive is immediately
available. If the online (default) mode is used, data can be written
onto it and you may continue with array configuration, e.g.,
including the array into a logical volume, before the array’s
initialization is completed.
available. If the online (default) mode is used, data can be written
onto it and you may continue with array configuration, e.g.,
including the array into a logical volume, before the array’s
initialization is completed.
Stripe Size
This option should only be changed by experienced engineers.
Setting to an incongruous value can severely drag the
performance. This option should only be changed when you can
be sure of the performance gains it might bring you.
Setting to an incongruous value can severely drag the
performance. This option should only be changed when you can
be sure of the performance gains it might bring you.
The default value is determined by controller Optimization Mode
setting and the RAID level used for the array.
setting and the RAID level used for the array.
Press [ESC] to continue when all the preferences have been set.
A confirm box will appear on the screen. Verify all information in
the box before choosing “Yes” to confirm and proceed.
the box before choosing “Yes” to confirm and proceed.
If online initialization mode is applied, logical drive will first be created
and the controller will find appropriate time to initialize the array.
and the controller will find appropriate time to initialize the array.