Compaq Infortrend Manuale Utente
System Functions: Upgrading Firmware
C-5
Establishing the connection for the RS-232C Terminal Emulation
Please refer to chapter 4, “Connecting to Terminal Emulation,” and
also your hardware manual for details on establishing the
connection.
also your hardware manual for details on establishing the
connection.
Upgrading Both Boot Record and Firmware Binaries
1.
From the Main Menu, scroll down to "System Functions."
2.
Go to "Controller Maintenance."
3.
Choose "Advanced Maintenance."
4.
Select "Download Boot Record and Firmware."
5.
Set ZMODEM as the file transfer protocol of your terminal
emulation software.
emulation software.
6.
Send the Boot Record Binary to the controller. In
HyperTerminal, go to the "Transfer" menu and choose "Send
file." If you are not using Hyper Terminal, choose "Upload" or
"Send" (depending on the software).
HyperTerminal, go to the "Transfer" menu and choose "Send
file." If you are not using Hyper Terminal, choose "Upload" or
"Send" (depending on the software).
7.
After the Boot Record has been downloaded, send the
Firmware Binary to the controller. In HyperTerminal, go to the
"Transfer" menu and choose "Send file." If you are not using
Hyper Terminal, choose "Upload" or "Send" (depending on the
software).
Firmware Binary to the controller. In HyperTerminal, go to the
"Transfer" menu and choose "Send file." If you are not using
Hyper Terminal, choose "Upload" or "Send" (depending on the
software).
8.
When the Firmware completes downloading, the controller will
automatically reset itself.
automatically reset itself.