Compaq Infortrend Manuale Utente
Event Messages
D-1
Event Messages
The controller events can be categorized as follows:
Alert
Errors that need to attend to immediately
Warning
Errors
Notification
Command processed message sent from Firmware
The controller records all system events from power on, it can record up to
1,000 events. To power off or to reset the controller will cause an automatic
deletion of all the recorded event logs.
1,000 events. To power off or to reset the controller will cause an automatic
deletion of all the recorded event logs.
RAIDWatch manager' sub-module
,
Event Monitor, can be used to record
events on multiple controllers especially when controller reset or power-off is
an expected action. The Event Monitor runs independently on a host computer
and can store up to 1000 events (per controller unit) regardless of the
controller's current status. The software program is Java-based and is usually
bundled with RAIDWatch manager. Associated details can be found in the
RAIDWatch user's manual.
an expected action. The Event Monitor runs independently on a host computer
and can store up to 1000 events (per controller unit) regardless of the
controller's current status. The software program is Java-based and is usually
bundled with RAIDWatch manager. Associated details can be found in the
RAIDWatch user's manual.
Descriptions below may contain abbreviations. Abbreviations and Capitalized
letters are preserved for the coherency with the event messages shown on LCD
screen or terminal.
letters are preserved for the coherency with the event messages shown on LCD
screen or terminal.
Event Index
Controller Event
Alert:
[0104] Controller ALERT: DRAM Parity Error Detected
[0105] Controller <primary/secondary> SDRAM ECC <multi-bits/single-bit>
[0104] Controller ALERT: DRAM Parity Error Detected
[0105] Controller <primary/secondary> SDRAM ECC <multi-bits/single-bit>
Error Detected
[0110] CHL:_ FATAL ERROR (_)
[0111] Controller ALERT: Redundant Controller Failure Detected
[0111] Controller NOTICE: Redundant Controller Firmware Updated
[0114] Controller ALERT: Power Supply Unstable or NVRAM Failed
[0111] Controller ALERT: Redundant Controller Failure Detected
[0111] Controller NOTICE: Redundant Controller Firmware Updated
[0114] Controller ALERT: Power Supply Unstable or NVRAM Failed
Warning:
[0107] Memory Not Sufficient to Fully Support Current Config.
[0107] Memory Not Sufficient to Fully Support Current Config.
Appendix
Appendix
Appendix
Appendix
D