Adaptec FS4100 JBOD FS4100SR-AC Scheda Tecnica
Codici prodotto
FS4100SR-AC
Adaptec, Inc.
691 South Milpitas Boulevard
Milpitas, California 95035
Tel: (408) 945-8600
Fax: (408) 262-2533
Copyright 2003 Adaptec, Inc. All rights reserved. Adaptec and the Adaptec logo are trademarks of Adaptec, Inc., which may be registered in some jurisdictions.
Microsoft and Windows are registered trademarks of Microsoft Corporation, used under license. All other trademarks used are owned by their respective owners.
Microsoft and Windows are registered trademarks of Microsoft Corporation, used under license. All other trademarks used are owned by their respective owners.
Information supplied by Adaptec, Inc., is believed to be accurate and reliable at the time of printing, but Adaptec, Inc., assumes no responsibility for any errors that may appear in this document.
Adaptec, Inc., reserves the right, without notice, to make changes in product design or specifications. Information is subject to change without notice.
Adaptec, Inc., reserves the right, without notice, to make changes in product design or specifications. Information is subject to change without notice.
Part Number: 986534-011 Printed in U.S.A. 12/03
Literature Requests:
US and Canada: 1 (800) 442-7274 or (408) 957-7274
World Wide Web: http://www.adaptec.com
Pre-Sales Support: US and Canada: 1 (800) 442-7274 or (408) 957-7274
Pre-Sales Support: Europe: Tel: (32) 2-352-34-11 or Fax: (32) 2-352-34-00
Adaptec
FS4100 Fibre to SATA JBOD
S E R V E R S T O R A G E
D A T A S H E E T
System
Host interface
• One or two Fibre Channel controllers;
each controller supports up to four optical
or copper (SFP) connections, 200 MB/s
each (800 MB/s total)
or copper (SFP) connections, 200 MB/s
each (800 MB/s total)
• Ports can be used for host connections
or as a combination of host connection
and expansion
and expansion
• Serial (RS232) port
Disk drive interface
Independent 150 MB/s point-to-point
connections to each SATA disk drive with
dual port access and failover by each
controller to each drive
connections to each SATA disk drive with
dual port access and failover by each
controller to each drive
Measured performance
Up to 350 MB/s (sustained reads)
Intelligent Controller Specifications
• PowerPC 440 400 MHz RISC processor
• 128MB memory per controller
• ECC memory support
• 128MB memory per controller
• ECC memory support
Controller features
• Dual active with automatic, transparent
failover/failback
• Auto-negotiate speeds
• In-band and out-of-band management
• Replacement controller reflashes FW to
• In-band and out-of-band management
• Replacement controller reflashes FW to
match peer controller
• F_port and FL_port support
• Dedicated controller-to-controller
• Dedicated controller-to-controller
communication path
Capacity
Up to 12 drives (3 TB) capacity per
2U enclosure, with a total maximum of
96 drives (24 TB) capacity per subsystem
2U enclosure, with a total maximum of
96 drives (24 TB) capacity per subsystem
Redundant, hot-swappable components
• Up to two controllers
• Two independent AC power inlets
• Two advanced power and cooling
• Two independent AC power inlets
• Two advanced power and cooling
modules (APC)
• Enclosure services module
(hot-swappable, not redundant)
• Up to 12 drives
• No active components on data path
• No active components on data path
Maximum cable lengths
Optical: Up to 25 meters
Copper: Up to 6 meters
Copper: Up to 6 meters
Pedestal cabinet dimensions
19.5in H x 4.6in W x 21.5in D
(49.53cm H x 11.7cm W x 54.6cm D)
Weight with drives: 60 lbs (27 kg) max
(49.53cm H x 11.7cm W x 54.6cm D)
Weight with drives: 60 lbs (27 kg) max
Rackmount enclosure dimensions
3.5in H x 17.6in W x 19.5in D
(8.9cm H x 44.7cm W x 49.53cm D)
Weight with drives: 60 lbs (27 kg) max
(8.9cm H x 44.7cm W x 49.53cm D)
Weight with drives: 60 lbs (27 kg) max
3 year system warranty
Monitoring
Temperature, advanced power and cooling
modules including fan speed control,
disk drives, and I/O module(s)
modules including fan speed control,
disk drives, and I/O module(s)
Failure notification
SCSI enclosure services (SES) over I2C
physical interface, LEDs, audible alarms,
FRU (field replaceable unit) revision and
serial number reporting, events reported
to Adaptec Storage Examiner software
physical interface, LEDs, audible alarms,
FRU (field replaceable unit) revision and
serial number reporting, events reported
to Adaptec Storage Examiner software
Disk Drives
Capacity: Up to 250 GB
Rotational velocity: 7200 RPM
Interface: SATA
Form factor: 3.5-inch form factor,
Rotational velocity: 7200 RPM
Interface: SATA
Form factor: 3.5-inch form factor,
1.0-inch height
AC Power
Input voltage: Autoranging, 85-264 VAC
Input frequency: 47-63 Hz
Power factor correction: Per EN61000-3-2
Input current: 100-240 VAC @ 4-2.5 A
Output power: 491 W peak, 430 W average
Input frequency: 47-63 Hz
Power factor correction: Per EN61000-3-2
Input current: 100-240 VAC @ 4-2.5 A
Output power: 491 W peak, 430 W average
Operating Environment
Temperature: 0º to 40º C
Temperature gradient: 20º C per hour
Relative humidity: 5 to 95 percent
Temperature gradient: 20º C per hour
Relative humidity: 5 to 95 percent
(non-condensing)
Altitude: -200 to 10,000 feet
Shock: 5G @ 11ms, 1/2 sine wave pulse
Vibration: 0.2G @ 5Hz to 350Hz
Shock: 5G @ 11ms, 1/2 sine wave pulse
Vibration: 0.2G @ 5Hz to 350Hz
Electromagnetic emissions standards
CE Mark, EN55022 Class A, EN61000 Class A,
FCC Class A, Canadian DOC Class A,
VCCI Class A
FCC Class A, Canadian DOC Class A,
VCCI Class A
Safety standards
UL 1950, CSA 22.2-950, EN 60950
Quality standards
Manufactured under an ISO 9002 registered
quality system
quality system
Software
Adaptec Storage Examiner
Local or remote management, monitoring,
and configuration with host platform
support for Microsoft® Windows®,
Sun Solaris SPARC, and Linux
and configuration with host platform
support for Microsoft® Windows®,
Sun Solaris SPARC, and Linux
Technical Specifications
(Ordering Part Number: FS4100SR-AC)