Nortel Networks 608(WL) Manuale Utente
Chapter 4
Configuration via the Command Line Interface
E-DOC-CTC-20051017-0169 v0.1
142
4.7.1 Connection Parameters
Parameters table
The table below shows the connection parameters.
Connection name
[name]
This symbolic name only has local significance inside the SpeedTouch™ router.
This parameter is not used in the Phase 2 negotiations with the remote Security
Gateway.
This parameter is not used in the Phase 2 negotiations with the remote Security
Gateway.
Peer [peer]
Holds the symbolic name of the peer to which the connection applies.
Connection parameters
Parameter
Keyword
Description
Connection name
name
Mandatory. Symbolic name for the
connection, used internally in the
SpeedTouch™.
connection, used internally in the
SpeedTouch™.
Peer
peer
Mandatory. Symbolic name of the peer
entity to which the IPSec connection is
set up.
entity to which the IPSec connection is
set up.
Local network
localnetwork
Mandatory. The private local IP network
that has access to the IPSec connection.
that has access to the IPSec connection.
Remote network
remotenetwork
Mandatory. The private remote IP
network that has access to the IPSec
connection.
network that has access to the IPSec
connection.
Always-on alwayson
Mandatory. The permanent character of
the connection can be enabled or
disabled.
the connection can be enabled or
disabled.
Descriptors
descr
Mandatory.Symbolic name of the
Connection Security Descriptor.
Connection Security Descriptor.
Options
options
Optional. Refers an option list,
containing a number of options that
influence the VPN behaviour.
containing a number of options that
influence the VPN behaviour.
State
state
Enables or disables the connection
For a basic IPSec configuration only a subset of the peer parameters need to
be set to a specified value. Some parameters may remain unset.
be set to a specified value. Some parameters may remain unset.