Wayne-Dalton WDSF-10 Manuale Utente

Problem:
• I am setting up a scene, but the software will 
not let me add a particular module to the scene.

Problem:
• I have set up a schedule for a zone or scene, 
but the schedule is not being activated on time 
or is not being activated at all.

Solution:
•  If the modules’s icon is covered by a red 
circle-slash (i.e. “broken” symbol), follow the 
troubleshooting steps for a broken module and 
then select the module again.
•  Some modules do not support the 
functionality required to add them to a scene. 

Solution:
•  Check to be certain that the schedule item 
is enabled (by checking the check box to the 
left of the schedule item’s name), and that 
it is enabled on the desired days of week 
(by clicking on the desired days of the week 
between the event name and the event time).
•  Check to be certain that your computer’s 
date, time, and time zone are set correctly.  
You can access these through “Date and Time 
Properties” in the Windows Control Panel.
•  For sunrise and sunset schedules, ensure 
that the location nearest you is selected in the 
CHANGe LoCATIoN link on the SeTTINGS tab.
•  Your computer must be turned on for 
the schedule items to occur on time.  
Thinkessentials

®

 will also attempt to wake 

your computer out of low-power standby mode, 
but some computers do not reliably wake up 
from standby.  If your computer does not wake 
reliably from standby mode, ensure that it is 
always powered on so that the schedules work 
properly.

40