Yamaha AW4416 Manuale Utente

Use a CD-RW drive connected to 
the AW4416 to play back an audio 
CD (CD Play function).

[CD PLAY] key

M button → CD button

A

Select the SCSI ID number of the internal or 
external CD-RW drive.

B

This button switches the CD Play function on/
off. When the CD PLAY function is on, you can 
use the keys of the Transport section to operate 
the CD-RW drive.

• While the CD PLAY MODE button 2 is on, 

all keys except the [CURSOR] keys, [DATA/
JOG] dial, [ENTER] key, and Transport sec-
tion keys will be disabled.

• The CD audio signal is routed through the 

stereo output channel and output from the 
STEREO OUT jacks. (Use the STEREO fader 
to adjust the volume.) During this time, the 
signals of other channels will not be sent to 
the stereo output channel.

• For details on the CD Play function, refer to 

Operation Guide “Chapter 17. Mastering.”

C

This displays the track number (TRACK) cur-
rently selected in the track list 4, and the 
elapsed time of that track (TIME).

D

This list shows the audio track numbers on the 
CD (TRACK area), and the times for each track 
(TIME area). The currently selected audio track 
will be highlighted.

You can move the cursor to the track list and 
switch the playback track by using the 
[DATA/JOG] dial and the [ENTER] key.

4

3

1

2

Play the CD

Stop the CD

Rewind/fast-forward the CD

Select tracks