Yamaha AW4416 Manuale Utente

Assign signals to the inputs of input 
channels 1–24, return channels 1/2, 
and recorder tracks 1–16.

• [SETUP] key → [F1] (Patch IN) key 

(*1)

• Repeatedly press the [SETUP] key 

until the display shown at right 
appears.

*1. In the SET UP screen, the tabs dis-

played at the bottom are divided 
into two groups. If the Patch IN tab is 
not assigned to the [F1] key when 
you press the [SETUP] key, press the 
[SETUP] key + [F1] (CHANGE TAB) 
key to switch the tab.

M button → SETU button → Patch IN tab

A

Select the signal that will be assigned to input 
channels 1–24 and return channels 1/2. The fol-
lowing signals can be assigned to each channel.

● Input channels 1–24

● Return channels 1/2

B

Select whether effects 1/2 will be used via AUX 
send/return (AUX7/AUX8), or inserted into a 
specified channel (INSERT). For details on oper-
ation, refer to Operation Guide “Chapter 10. 
Internal effects.”

2

1

3

INPUT jacks 1–8

INPUT 1–8 of an I/O card 
(slot 1)

INPUT 1–8 of an I/O card 
(slot 2)

L/R channels of the DIGITAL 
STEREO IN jack

Sampling pads 1–8

Internal metronome

Return of internal effect 1

Return of internal effect 2

INPUT jacks 1/2–7/8

INPUT 1/2–7/8 of an I/O 
card (slot 1)

INPUT 1/2–7/8 of an I/O 
card (slot 2)

DIGITAL STEREO IN jack 
(stereo)