Yamaha AW4416 Manuale Utente

SET UP screen

Monitor the state of the digital audio sig-
nals being input from the DIGITAL STE-
REO IN jack or from digital I/O cards 
installed in the OPTION I/O slots.

• [SETUP] key → [F5] (Monitor) key 

(*1)

• Repeatedly press the [SETUP] key until 

the screen shown at the right appears.

*1. In the SET UP screen, the tabs dis-

played at the bottom of the screen are 
divided into two groups. If the Monitor 
tab is not assigned to the [F5] key 
when you press the [SETUP] key, press 
the [SHIFT] key + [F1] (CHANGE TAB) 
key to switch the tabs.

M button → SETU button → Monitor tab

A

This area monitors the state of the digital input 
signals from the DIGITAL STEREO IN jack (DIG-
ITAL ST IN) or from a digital I/O card installed 
in an OPTION I/O slot (OPTION INPUTS). The 
following items are displayed.

● Fs
This shows the sampling frequency of the input 
signal.

● EMPHASIS
This shows whether the input signal has been 
processed by emphasis.

2

1

44.1 kHz sampling fre-
quency

48 kHz sampling frequency

Unknown sampling fre-
quency

No signal being input, or 
invalid signal being input

Emphasis on

Emphasis off

Unknown