Yamaha AW4416 Manuale Utente

SET UP screen

Select the word clock source to which the 
AW4416 will synchronize. In this page 
you can also make settings for stereo bus 
cascade connections.

• [SETUP] key → [F4] (D.in Setup) key 

(*1)

• Repeatedly press the [SETUP] key until 

the screen shown at the right appears.

*1. In the SET UP screen, the tabs dis-

played at the bottom of the screen are 
divided into two groups. If the D.in 
Setup tab is not assigned to the [F4] 
key when you press the [SETUP] key, 
press the [SHIFT] key + [F1] (CHANGE 
TAB) key to switch the tabs.

M button → SETU button → D.in Setup 
tab

A

If an optional I/O card is installed in OPTION I/
O slots 1/2, a graphic will be displayed to show 
the type of I/O card. Cards in which no card is 
installed will be displayed as “No Card!”

B

From the following choices, select one of the 
following clock source to which the AW4416 
will synchronize.

● SLOT 1 1/2–7/8
● SLOT 2 1/2–7/8
The input signal from a digital I/O card installed 
in OPTION I/O slots 1/2 will be the clock 
source. One pair of digital I/O card input chan-
nels 1/2–7/8 can be selected.

● INT
The internal clock of the AW4416 will be used 
as the clock source.

● D.ST IN
The word clock data included in the input sig-
nal of the DIGITAL STEREO IN jack will be the 
clock source.

● WCLK IN
The word clock data included in the input sig-
nal of the WORD CLOCK IN jack will be the 
clock source.

• The highlighted button indicates the cur-

rently selected word clock source.

• Buttons marked with an “X” indicate that no 

digital audio signal is being input from the 
corresponding slot/jack.

• Buttons marked by a / indicate that a digital 

audio signal is being input from the corre-
sponding slot/jack, but is not synchronized 
with the internal clock of the AW4416.

• Buttons without an X or / symbol indicate 

that a digital audio signal is being input from 
the corresponding slot/jack, and is synchro-
nized with the internal clock of the 
AW4416.

4

3

5

2

1