Yamaha AW4416 Manuale Utente

SAMP. PAD screen

Import CD-DA (CD audio) audio data from 
an audio CD/mixed-mode CD-ROM 
inserted in an internal or external CD-RW 
drive, and assign it to a sampling pad.

• Sampling pad section [EDIT] pad → [F2] 

(CD Import) key

• Repeatedly press the [EDIT] key until the 

screen shown at the right appears.

M button → SAMP.PAD EDIT button → CD 
Import tab

A

Move the cursor to this area and rotate the 
[DATA/JOG] dial to select the internal or exter-
nal CD-RW drive.

B

Select the pad to which you wish to assign CD-
DA data. Pads to which no sample has been 
assigned will be displayed as “-NO ASN-”.

C

This is the track list of the audio CD/mixed-
mode CD-ROM inserted in the CD-RW drive. 
Move the cursor to this list, and rotate the 
[DATA/JOG] dial to select a track. The value at 
the right shows the total time of that track.

D

Select the area of the track specified in 3 that 
will be assigned to the pad, in units of “min-
utes:seconds:frames (1/75 seconds).”
Move the cursor to this area and use the [DATA/
JOG] dial to specify the START (start point) and 
END (end point).

Later, you can trim the sample assigned to the 
pad to make even finer adjustments. Samples 
can be trimmed in the SAMP. PAD screen 
PAD Edit page (→ P.86).

E

This button executes the sample import opera-
tion.

CD-DA data can be imported only for songs 
whose sampling frequency is 44.1 kHz.

Execution of this operation requires a longer 
time than the actual time length of the data. 
Also, processing cannot be cancelled once 
the operation has been executed.

■ Additional functions in the CD 

In the CD Import page you can press the [SHIFT] 
key to assign the following additional functions to 
the [F1]–[F2] keys.

Close the tray of the CD-RW drive.

Eject the tray of the CD-RW drive.

2

4

3

5

1