Motorola MPMC101 Manuale Utente

3-1

The PMC Adapter and the PCI Adapter use the same software 
drivers. Whether the adapter is installed to a PCI slot or to a PMC 
mezzanine slot, the selection of a driver is based upon the operating 
system in use by the host computer; not by the configuration of the 
system hardware. 

There is no software to install because the needed driver software 
is installed as the driver for the NCR825 family of SCSI adapters 
during installation of AIX. However, the AIX system administrator 
must now determine the names of the peripheral devices that AIX 
will assign upon booting up, and configure the devices with System 
Management Integration Tool (SMIT).

The administrator could determine the new SCSI disk device names 
by using the command line:

This would indicate all SCSI disks found, not just the new ones. The 
new devices indicate that they were ÒdefinedÓ however, they are 
not ÒavailableÓ until the logical volumes and volume groups are 
configured and file systems created via SMIT and mounted by a 
knowledgeable administrator.

Refer to your AIX System AdministratorÕs documentation for more 
information on configuring the driver and peripheral devices.